Views: 200 Author: Site Editor Publish Time: 2021-07-26 Origin: Site
Intelligent switch refers to the combination and programming of control board and electronic components to realize intelligent circuit on-off. Compared with mechanical wall switch, smart sockets and switches have many features like safety use and beautiful style. It breaks the single function of traditional wall switch on and off, in addition to the innovation in function, it also gives the effect of switch decoration embellishment. Intelligent switch has many functions, such as mutual control, lighting display, multi-operation, standard control, power off protection, automatic night light and so on.
Intelligent switch with socket is widely used in many fields, such as home intelligent transformation, office intelligent transformation, industrial intelligent transformation, agriculture, forestry, fishery and animal husbandry intelligent transformation, etc., which greatly saves energy, improves the generation efficiency and reduces the operating cost, and truly achieves the intelligent world.
Rated voltage: refers to the intelligent switch in normal operation allowed safe voltage, added to the intelligent wall socket switch at both ends of the voltage greater than this value, will cause fire breakdown between the two contacts.
Rated current: the maximum safe current allowed to pass when the intelligent switch is turned on. When this value is exceeded, the contact of the intelligent metal clad switches will burn down because of the excessive current.
Insulation resistance: the resistance of the conductor and insulation of the intelligent switch, the insulation resistance should be more than 100MΩ.
Contact resistance: refers to the intelligent stainless steel cooker switch in the open state, each pair of contacts between the resistance value, generally required to be below 0.1-0.5Ω, the smaller the value, the better.
Voltage: the highest voltage that an intelligent switch can withstand between a conductor and the ground.
Life: refers to the number of times the intelligent touch light switch which can operate under normal working conditions. The general requirement is about 5000-35000 times.
The cleaning of the intelligent switch must be done in the case of power failure. It can only clean its panel. Wet the towel with 0.03% detergent, wring and wiping the switch panel, then wet the towel with drinking water, and wipe the panel after drying. The intelligent capacitive touch switch should be checked regularly in use to find fault and repair it in time to ensure its safe and reliable use.
When considering the selection of remote control switch, we should first consider its practicability and safety.
The key point of intelligent remote control switch is to have good stability and strong anti-interference ability. Most of the remote control switches use RF mode to transmit signals. Because of the different technology, some touch button switches are often disturbed by radio waves, which makes their frequency unstable and easy to lose control. Intelligent remote control switch can preset different scene mode, change different mode when different demand, and give people comfortable feeling.
The installation mode of intelligent remote control switch is simple. For the newly decorated house, there is no need to destroy the wall, no need to add any other lines, remove the original mechanical waterproof push button switch and replace the intelligent remote control switch directly without affecting the overall decoration effect.
Convenient and quick setting of each switch scene is a major feature of intelligent remote control glass panel switch, ordinary personnel can debug the required effect according to the product specification, without professional personnel, special tools to debug.
